"Tokyo marui 40 PRO"
Other RCs
Tokyo marui 40 PRO (1/40)Product introduction
I think that it is goods (first-half [ of the 90s ] ?.) years [ several ] before having seen accidentally, having become wanting and having bought it with the nearby plastic model store.
When not using, a battery is built into the stand used as a showcase, and it is made to charge and run the Ni-cd battery in chassis. Body By F40 made from a plastic, it reappears to the mirror. Handle Although a good run place cannot be found, but this model is deposited with a friend in the case of a move and there is a run place now, since it is a quite small model, since it has not said for taking Handle so and so is in the state which cannot be said. Option It is described as the schedule out of which a high-power motor, a sponge tire, a front reinforcement spring, and a clear body come to a description as a pure option.
yokomo YR-4 (1/10)
Product introduction Chassis is a product made from glass fiber, and, as for suspension, a front and rear have an oil damper by double wishborn.
It is also possible power transfer [ before and after ] to use a belt by four flower drive, and for a drive to extract a drive of a front by the option at the time of accelerator-off.
Body BMW325i which yokomo has imported is used. Handle
It is stabilized for a four flower drive.
Since [ which controlled the model of other same categories ] there is nothing things, comparison is impossible.
Option
It is already a lot from what to what.
In press (1/10)Product introduction Chassis is a product made from glass fiber by the chassis kit for F-1 of an option [ body ], and the spring in which, as for suspension, a front has IND mechanism, and rear are T bars.
Motors are 540 types, back defferencial is a ball type, and a tire is sponge.
Body Ferrari made from tamiya 643 is used. Handle
In the case of the normal chassis made from glass fiber, it has shaken at stability, and although it was good, even if it was going to conquer the undershirt in the front using the good tire of a grip, it becomes exaggerated suddenly after an undershirt and a close contest was faced in the parking lot as it being as becoming unstable in the kyosho circuit.
Option
The kit carbon chassis, a carbon shaft, the motor mount made from aluminum, deff hausing made from aluminum, and whose chlorofluocarbon front suspension alignment adjustment are enabled, the kit which forms rear into ball suspension, front suspension spring It is pure and is prepared.
kyosho Laser ZX-RR (1/10)Product introduction By buggy of 4WDs, the damper by which Teflon machining was carried out at laser ZX-R, and the product with the mechanism in which a reverse alder will be automatically cut if a tail flows are attached. Chassis can use the battery of both stick and rose cell with general 2 deck composition by glass fiber.
Motors are 540 types, order deff is a ball type, and the drive is transmitted by the belt.
The one-way clutch which makes front wheel drive power free at the time of the sliper parking latch which misses useless torque, and accelerator-off reaches the place of the Spa gear attachment.
Body The thing of an attached exclusive design is used. The thing of the product [ wing ] made from resin is attached. Handle Although it was not necessarily made to run through a course, sound is also quiet, start is also quiet and a drive loss and its riding of few one and speed are good. The capacity of a damper is also enough and it does not bound by landing after a jump. Since there was no exactly which will not require a motion, the reverse alder equipment appended is not used. Option
It seems that there is also a risk of the escape of the power when receiving a shock being lost and others being damaged when this is strengthened although the parts which aluminum-izes the plate which stops the shaft of the root of suspension of order had come out of per paranoia.
ZX-RR has in fact much direction currently run by on-load specification.
kyosho Gallop 4WDS (1/10)
Product introduction By buggy of 4WDs, the back ring has the structure which goes out to a front wheel and a reverse phase, with the front product in about 12 to three years.
Chassis has the appearance which was constructed in the pipe by the structure which combined aluminum and resin.
Motors are 540 types, order deff is transmitted by the gear type and the drive is transmitted with the chain.
Body It is touch that chassis serves as a body. . The pure wing is a product made from poly. Handle Since a back ring goes out conversely, it is quite quick. It was an impression called the kana with better rear already straddling just for a moment. Option It does not know with regrettable. With the oil less metal, since the drive loss was tolerably large, bearing was put in. It was made to upgrade to amplifier specification from pure speed controler specification on the way.
tamiya Porsche 935 (1/12)
There is no president Mr. passes away company, it carries out now, and AYK which was also using something is a seed. A plastic body comes out with reality radio controll, and I think that it is good.
|